Announcement PDF ASX Announcement Right Resources Limited ABN 81 649 632 744 www.rightresources.com.au 41-47 Colin Street West Perth WA 6005 +61 8 6245 2050 ASX:RRE 4 September 2026 New Gold Result Upgrades Eastern Blue Target Ahead of Maiden Drilling Highlights • New peak selective rock-chip result of 5.16 g/t Au returned from the eastern side of the Blue Prospect. Rock-chip samples are selective by nature and may not be representative of the grade or continuity of underlying mineralisation. • Multiple widely spaced rock-chip samples returned greater than 0.3 g/t Au, including the new peak result of 5.16 g/t Au, across the Blue Prospect. • New soil and rock-chip results have defined a 4.0 km north-south by 0.8 km east-west gold- anomalous corridor on the eastern side of the Blue Prospect. • A priority eastern target measuring approximately 300 m north-south by 300 m east-west contains strongly elevated bismuth values, coincident with the 5.16 g/t Au rock-chip result and extensive quartz veining. • Within the broader eastern gold anomaly, coincident gold and bismuth anomalism has identified discrete priority areas for follow-up mapping and drill targeting. • Reconnaissance mapping has identified hydrothermal breccias, stockwork quartz veining and quartz- sulphide mineralisation hosted within felsic intrusive units, including multiple breccia and pegmatite bodies mapped over an approximately 3 km north-south corridor. • The results build on the previously reported 4.7 km by 3.4 km multi-element footprint1 at Blue and further refine targets within the interpreted intrusion-related tungsten-gold system. • The fully funded maiden aircore drilling program of 60 holes for 3,000 m remains scheduled to commence in September 2026. An initial 2,000 m will target both high-priority tungsten and gold targets on EL9028, with the final drill design being refined to incorporate the new eastern targets where access permits. New Results Upgrade Eastern Blue Target Right Resources Limited (ASX: RRE) (Right Resources or the Company) is pleased to report new results from ongoing geological mapping, soil sampling and rock-chip sampling at the Blue Prospect (Blue), located approximately 22 km north of Tumbarumba, New South Wales (Figure 1). The new work follows the Company’s announcements of 24 August 2026, which reported the first gold results from Blue, including rock-chip assays up to 1.19 g/t Au2 , and 27 August 2026, which confirmed approvals and funding for the initial maiden aircore drilling program3 . The latest sampling has returned a new peak rock-chip assay of 5.16 g/t Au and has refined a priority target on the eastern side of the prospect. Using a geochemical evaluation methodology based on Halley (2018), the Company has identified that all rock-chip samples analysed to date returning more than 100 ppb Au (0.1 g/t Au) are coincident with bismuth values greater than 100 times interpreted background. This association supports the use of bismuth as an important pathfinder for gold mineralisation at Blue. The peak gold values of 1.19 g/t Au and 5.16 g/t Au occur within areas of bismuth anomalism exceeding 1,000 times interpreted background. 1 Refer ASX Announcement dated 15 June 2026, Blue Tungsten Prospect Expands to 4.7km x 3.4km 2 Refer ASX Announcement dated 24 August 2026, Gold Results Strengthen Extensive Multi-Element Target at Blue Prospect 3 Refer ASX Announcement dated 27 August 2026, Fully Funded Maiden Drilling to Commence at Blue Prospect 2 www.rightresources.com.au Systematic soil sampling on a nominal 200 m by 200 m spacing has defined a low-level gold-anomalous corridor measuring approximately 4,000 m north-south by 800 m east-west (Figure 2). Soil samples were analysed using low-level fire assay techniques, while reconnaissance rock-chip samples were collected by the Company and analysed by ALS in Brisbane. Multiple widely spaced rock-chip samples returned more than 300 ppb Au (0.3 g/t Au), including results of 1.19 g/t Au2 and 5.16 g/t Au (Table 1), within an approximately 300 m by 300 m area of hydrothermal alteration and quartz veining on the eastern side of Blue. The eastern anomaly forms part of the broader 4.7 km by 3.4 km multi-element footprint previously reported at Blue1 . The new results do not expand the overall footprint, but instead refine priority targets within the existing anomalous area. Managing Director Graham Howard commented: “The new 5.16 g/t gold result, together with multiple widely spaced rock-chip samples above 0.3 g/t Au and the definition of a 4 km eastern gold-anomalous corridor, materially strengthens our targeting ahead of maiden drilling. These results build on the tungsten, gold and bismuth footprint previously reported at Blue and have further refined the areas we want to test. The next step is to determine whether the surface geochemical and geological signatures continue below surface. We are refining the initial drill design to incorporate the new eastern targets where access permits and look forward to commencing drilling in September.” Figure 1: Location of the Blue prospect, 22 km north of Tumbarumba, NSW 3 www.rightresources.com.au Figure 2: Blue prospect showing interpreted soil and rock gold anomalies Table 1: Summary of outcrop gold results above 0.1 ppm Au SAMPLE NUMBER LOCATION SAMPLE TYPE EASTING NORTHING W_ppm WO3 (%) Bi_ppm Au_ppm MET SUB-SAMPLE 1 EL9028 MET 592421 6061185 6130 0.77% 0.10 MET SUB-SAMPLE 2 EL9028 MET 592421 6061185 6380 0.80% 0.15 RTRK_00331 EL9028 ROCK 594032 6061348 11 0.0014 109 0.397 RTRK_00334 EL9028 ROCK 593649 6061555 400 0.050 76 1.19 RTRK_00338 EL9028 ROCK 593896 6060065 51.1 0.0064 299 0.805 RTRK_00339 EL9028 ROCK 593799 6060715 2.28 0.0003 45.1 0.392 RTRK_00351 EL9028 ROCK 592730 6063907 65.7 0.0083 285 0.382 RTRK_00320 EL9028 ROCK 593785 6062222 209 0.026 131.5 0.319 RTRK_00322 EL9028 ROCK 594004 6062139 80.1 0.01 630 5.16 RTRK_00323 EL9028 ROCK 594006 6062161 1.87 0.00024 56.4 0.417 4 www.rightresources.com.au Gold-Bismuth Association Within the broader eastern gold anomaly, discrete zones of elevated bismuth geochemistry coincide with anomalous gold. Multiple widely spaced rock-chip samples have returned more than 0.1 g/t Au, with peak values of 5.16 g/t Au and 630 ppm bismuth reported from the priority eastern target area. The spatial association between gold and bismuth is consistent with the Company’s current interpretation of an intrusion-related hydrothermal system and provides vectors for follow-up exploration. This interpretation remains to be tested by drilling. A priority target on the eastern side of the prospect measures approximately 300 m by 300 m (Figure 2). Work completed in this area has identified: • strongly elevated bismuth values, with peak values of 630 ppm Bi; • a peak selective rock-chip assay of 5.16 g/t Au (Figure 3); and • multiple semi-continuous quartz veins up to 10 cm thick, trending north-south. The target has been prioritised for detailed mapping and incorporation into the maiden drilling program where access permits. Figure 3: Quartz veining within an area of hydrothermal alteration at eastern Blue, associated with coincident bismuth anomalism and rock-chip gold grades of up to 5.16 g/t Au (RTRK_00322). 5 www.rightresources.com.au Hydrothermal Breccias Refine Drill Targeting Reconnaissance mapping has identified several styles of hydrothermal alteration and mineralisation associated with felsic intrusive rocks along the eastern boundary of the current sampling program, including: • quartz-sulphide stockwork veining; • quartz-tourmaline breccias; • quartz-sulphide-cemented breccias; • pegmatites; • multi-phase hydrothermal alteration systems. The mapped breccias contain angular to sub-angular fragments supported within quartz-tourmaline or quartz- sulphide matrices (Figure 4). The Company interprets these features as evidence of focused hydrothermal fluid flow within the broader mineralised system. Multiple breccia and pegmatite bodies have been mapped over an approximately 3 km north-south corridor within the eastern gold anomaly. These features are considered important exploration targets due to their spatial association with quartz veining, sulphide mineralisation and anomalous gold and bismuth geochemistry. The breccias may represent zones of focused fluid flow and mineral deposition within the interpreted intrusion-related hydrothermal system. Drilling will be required to determine their subsurface extent, geometry and any relationship to tungsten and gold mineralisation. Figure 4: Mapped hydrothermal breccias within the eastern Blue gold anomaly. 6 www.rightresources.com.au Maiden Drilling Program The fully funded initial aircore drilling program remains scheduled to commence in September 2026. As announced on 27 August 2026, the program comprises approximately 60 holes for 3,000 m, with approximately 2,000 m of drilling planned to initially target tungsten and gold anomalies on EL9028. At the Blue Prospect, the Company has received approval for up to 120 aircore drill holes and a further 20 RC and/or diamond drill holes. The Company is refining final hole locations to incorporate the new eastern gold and bismuth targets where access permits, while maintaining the planned testing of the previously identified tungsten and gold targets. The initial drilling is reconnaissance in nature and is designed to provide the first subsurface test of selected targets. It will assess whether surface geochemical and geological trends persist below surface and provide initial information on mineralisation tenor, geometry and continuity. The program is not designed to define a Mineral Resource. Blue Prospect Context When tungsten, gold and bismuth geochemistry are considered together, the interpreted multi-element footprint at Blue extends over approximately 4.7 km by 3.4 km. This footprint was previously reported by the Company and remains open in areas where systematic sampling has not closed off the anomalism. Gold and bismuth anomalism occurs within the central part of the prospect and increases towards the current eastern project boundary. Accordingly, the extent to which the system can be tested or extended eastward will depend on tenure, access and any further work outside the currently defined sampling area. The combined geological and geochemical datasets support the Company’s interpretation of a potentially substantial intrusion-related tungsten-gold system. The scale, grade and continuity of any subsurface mineralisation remain untested. Next Steps • Complete additional infill soil and outcrop sampling; • Continue detailed geological and structural mapping; • Commence the initial aircore drilling program in September 2026; • Assess gold, tungsten, bismuth and other element vectors across the broader project area; and • Undertake CODES field evaluation during the December Quarter 2026 to assist in interpreting the distribution and controls of the hydrothermal breccias and the broader mineralised system. The CODES work is intended to assess whether Blue comprises several overlapping phases of a reduced intrusion-related gold system rather than one single large mineralised system. ENDS This announcement has been approved for release by the Board of Right Resources Limited. 7 www.rightresources.com.au Further Information 0BGraham Howard Managing Director E: info@rightresources.com.au 1BJessamyn Lyons Company Secretary E: jessamyn.lyons@rightresources.com.au 2BMedia David Tasker Chapter One E: dtasker@chapteroneadvisors.com.au 3BFollow Us About Right Resources Right Resources Limited is a New South Wales-based mineral exploration company focused on advancing a portfolio of gold and copper assets across 2,459 km² of tenements in the Tumbarumba and New England regions, both located within historically significant goldfields. The Company’s portfolio boasts eight 100% owned exploration licences in New South Wales (NSW), which are considered by the Company as highly prospective for copper and gold. The primary focus of exploration will be on the eight licenses held in the Tumbarumba Region, which lies within the Lachlan Fold Belt and adjacent to a prolific mineral province near the Gilmore Fault Zone (GFZ), with over 90 km of tenement strike length along this key structural feature associated with gold mineralisation. The host geology in the project areas is highly prospective for gold and copper mineralisation. The Company's exploration portfolio includes the Pilot Project, a high-grade gold target with a history of high- grade underground gold production, and the Blue Prospect, where surface exploration has identified a broad tungsten-bismuth-gold geochemical footprint and scheelite-bearing quartz-tourmaline veining. Right Resources is progressing metallurgical testwork at Blue and diamond drilling at Pilot, with results being released progressively. Forward Statements This announcement may contain forward-looking statements or information, including forecasts, projections, opinions and conclusions. These statements are not guarantees of future performance or statements of fact. Actual events and results may differ materially due to risks, uncertainties and other factors, including funding requirements, metal prices, exploration and development risks, operational challenges, competition, regulatory restrictions, title matters and broader business, economic, political and social conditions. Although Right Resources believes there is a reasonable basis for any forward-looking statements, such statements involve significant risks and uncertainties. Competent Person Statements Graham Howard The information in this announcement that relates to Exploration Results is based on and fairly represents information and supporting documentation compiled by Graham Howard, who is Managing Director of Right Resources Limited. Mr Howard is a Fellow of the Australian Institute of Mining and Metallurgy (AusIMM). Mr Howard has sufficient experience that is relevant to the style of mineralisation and type of deposit under consideration, and to the activity being undertaken, to qualify as a Competent Person as defined in the 2012 Edition of the “Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore Reserves” (JORC, 2012). Mr Howard consents to the inclusion in this announcement of the matters based on his information in the form and context in which it appears. 8 www.rightresources.com.au Previously Reported Exploration Results The information in this announcement that relates to previously reported exploration results and metallurgical testwork has been extracted from the Company's ASX announcements dated 21 May 2026, 15 June 2026, 17 July 2026, 5 August 2026, 12 August 2026, 24 August 2026 and 27 August 2026. The Company confirms that it is not aware of any new information or data that materially affects the information included in those announcements and that the form and context in which the Competent Person's findings are presented have not been materially modified. All previously released market announcements referred to in this announcement can be found at rightresources.com.au 9 www.rightresources.com.au Appendix 1 - JORC Table 1, Sections 1 - 2 Section 1 Sampling Techniques and Data Criteria JORC Code explanation Commentary Sampling techniques • Nature and quality of sampling (e.g. cut channels, random chips, or specific specialised industry standard measurement tools appropriate to the minerals under investigation, such as down hole gamma sondes, or handheld XRF instruments, etc). These examples should not be taken as limiting the broad meaning of sampling. • Include reference to measures taken to ensure sample representivity and the appropriate calibration of any measurement tools or systems used. • Aspects of the determination of mineralisation that are Material to the Public Report. • In cases where ‘industry standard’ work has been done this would be relatively simple (eg. ‘reverse circulation drilling was used to obtain 1 m samples from which 3 kg was pulverised to produce a 30 g charge for fire assay’). In other cases, more explanation may be required, such as where there is coarse gold that has inherent sampling problems. Unusual commodities or mineralisation types (e.g. submarine nodules) may warrant disclosure of detailed information. • No drilling has been completed by the Company across EL9028. • Samples taken by the Company across the Blue Prospect, EL9028 include: • 196 surface rock samples of outcrop and sub-crop were collected to date by experienced field crew. 96 additional rock samples since ASX release on 24 August 2026. These samples included; in-field UV light, pXRF and geological mineral identification. The highest-grade tungsten samples based on in-field pXRF were not preselected for assay. These samples have been assigned to CODES for testwork. - Representative samples of outcrop were taken. - The Company also applied visual and use of short wavelength ultraviolet light to confirm visible scheelite. - 165 of the 196 rock samples were analysed for gold. • 362 surface soil samples (103 additional) from the B Horizon were initially analysed using a portable XRF analyser. Samples were then issued to ALS Brisbane for multi-element (ME) and gold (Au) assaying. - Sampling of soil based on a nominal 200m x 200m grid. This is designed to find the extents of mineralisation. - In the area of the Blue metallurgy sample, soil samples were taken on nominal 20m centres adjacent to Forestry Corporation access roads. - XRF analysis are point samples of soil samples collected. Company protocol is to take five (5) XRF readings per soil sample. Drilling Techniques • Drill type (eg. core, reverse circulation, open hole hammer, rotary air blast, auger, Bangka, sonic, etc) and details (eg. core diameter, triple or standard tube, depth of diamond tails, face-sampling bit or other type, whether core is oriented and if so, by what method, etc) • No previous drilling has occurred across the Blue Prospect on EL9028. Drill sample recovery • Method of recording and assessing core and chip sample recoveries and results assessed. • Measures taken to maximise sample recovery and ensure representative nature of the samples. • Whether a relationship exists between sample recovery and grade and whether sample bias may have occurred due to preferential loss/gain of fine/coarse material. • No drilling has occurred across the Blue Prospect on EL9028. 10 www.rightresources.com.au Criteria JORC Code explanation Commentary Logging • Whether core and chip samples have been geologically and geotechnically logged to a level of detail to support appropriate Mineral Resource estimation, mining studies and metallurgical studies. • Whether logging is qualitative or quantitative in nature. Core (or costean, channel, etc) photography. • The total length and percentage of the relevant intersections logged. • All rock samples were geologically logged. Geological logging per sample is qualitative in nature. • The rock samples reflect a surface point sample and do not represent a total length across the area. • Photos of the samples were taken of samples as part of company protocols. • GPS coordinates were recorded for each sample site. Sub-sampling techniques and sample preparation • If core, whether cut or sawn and whether quarter, half or all core taken. • If non-core, whether riffled, tube sampled, rotary split, etc and whether sampled wet or dry. • For all sample types, the nature, quality and appropriateness of the sample preparation technique. • Quality control procedures adopted for all sub- sampling stages to maximise representivity of samples. • Measures taken to ensure that the sampling is representative of the in-situ material collected, including for instance results for field duplicate/second-half sampling. • Whether sample sizes are appropriate to the grain size of the material being sampled. • Rock Samples, whole sample processing of the 196 rock samples was completed at the laboratory. • No splitting of the samples occurred due to sample weight <3kg. • The rock samples taken by the Company indicate the potential grade variability within the project area. • No field duplicates of rock samples were taken. • Samples were dried, crushed and pulverised with 85% passing 75 microns • Samples were subject to four-acid near- total digestion followed by ICP-AES/ICP- MS analysis using the ME-MS61L multi- element suite. Gold was analysed separately by fire assay using method Au-ICP22. • Soil Samples underwent whole sample processing • No splitting of soil samples occurred due to weight <3kg. • Samples were dried, pulverised to 85% passing 75 microns. Quality of assay data and laboratory tests • The nature, quality and appropriateness of the assaying and laboratory procedures used and whether the technique is considered partial or total. • For geophysical tools, spectrometers, handheld XRF instruments, etc, the parameters used in determining the analysis including instrument make and model, reading times, calibrations factors applied and their derivation, etc. • Nature of quality control procedures adopted (eg. standards, blanks, duplicates, external laboratory checks) and whether acceptable levels of accuracy (ie. lack of bias) and precision have been established. For all Company Rock Samples: • Rock samples were issued to ALS Brisbane where they were dried, crushed with 95% passing 2mm and pulverised to produce a 50g charge for multielement analysis • Multi-element analysis was completed using Triple Quad, Four Acid Super Trace and Four Acid Digest methodologies (ME -MS61L), with ICP- MS utilised as the analytical instrument. Samples returning >10,000 ppm W were additionally analysed by XRF (ME- XRF15B). • Gold was analysed in 165 rock samples at ALS Brisbane using method Au- ICP22. • The Company uses certified reference material (CRM) for all gold, geochemistry samples at a targeted frequency of 1 every 20 samples. • Blank material inserted 1:20. • No external laboratory checks have occurred. 11 www.rightresources.com.au Criteria JORC Code explanation Commentary • CRM performance falls within acceptable limits of 2 Standard Deviations. For all Company Soil Samples: • Portable XRF (Olympus Vanta V2MR portable XRF analyser) was calibrated using inbuilt Vanta calibration methodology for each session of XRF analysis. Vanta XRF confirmed it was calibrated to manufacturers specification for each analytical session. Company protocol included testing using portable XRF unit output with CRM material • Samples were issued to ALS Brisbane and subject to four acid (near total digest) with ICP-AES/ICP-MS (ME- MS61L (low level) multi element suite covering 48 elements, low level gold assay Au-ICP21. • 106 soil ME assays underwent QAQC for W using MS-ME85 (fusion). Verification of sampling and assaying • The verification of significant intersections by either independent or alternative company personnel. • The use of twinned holes. • Documentation of primary data, data entry procedures, data verification, data storage (physical and electronic) protocols. • Discuss any adjustment to assay data. • Company completed XRF analysis at laboratory for select rock samples including high grade samples • Two batches of soil samples were issued to laboratory for QAQC of XRF results • No field duplicates of rock samples were taken • Laboratory duplicate analysis was completed for samples returning greater than 10,000 ppm W. • No field duplicates of soil samples have been taken by the Company. However, samples were initially analysed using pXRF. • No adjustments have been made to the assay data received by the laboratory. Location of data points • Accuracy and quality of surveys used to locate drill holes (collar and down-hole surveys), trenches, mine workings and other locations used in Mineral Resource estimation. • Specification of the grid system used. • Quality and adequacy of topographic control. • The horizontal datum used is GDA 94 and projection is MGA zone 55. The vertical datum is AHD71. • Surface topography has been generated using high resolution LiDAR survey completed by the Company in October 2023. • The surface topography has been used to improve elevations of the sample data. • Handheld GPS unit has been used to determine location with an estimated accuracy of +/- 5m. Data spacing and distribution • Data spacing for reporting of Exploration Results. • Whether the data spacing and distribution is sufficient to establish the degree of geological and grade continuity appropriate for the Mineral Resource and Ore Reserve estimation procedure(s) and classifications applied. • Whether sample compositing has been applied. • Soil samples were completed on a nominal 200m x 200m grid in a recently planted pine forest • Rock samples were collected as part of completing soil grid and where outcrop was located • Limited rock out crop occurs at surface resulting in data spacing that is clustered 12 www.rightresources.com.au Criteria JORC Code explanation Commentary and not evenly distributed across the surface. • This program traversed a recently planted pine forest • No drilling has occurred at the project. • The distribution of sampling is limited to the surface and is not used for Mineral Resource and Ore Reserve estimations. • No sample compositing has been applied. Rock samples reflect point sampling at surface. Orientation of data in relation to geological structure • Whether the orientation of sampling achieves unbiased sampling of possible structures and the extent to which this is known, considering the deposit type. • If the relationship between the drilling orientation and the orientation of key mineralised structures is considered to have introduced a sampling bias, this should be assessed and reported if material. • Soil samples were collected on a nominal 200m x 200m square pattern. • Rock samples reflect reconnaissance along roads and in forest area where outcrop / subcrop was located • Mineralisation system is hosted within dominantly felsic reduced S type intrusive package. • Sheeted quartz and quartz tourmaline veins up to 40 cm width have been mapped to extend over tens of meters in strike within alteration and sheared package. Intense quartz vein zones as observed range from a 20m to 70m width. • North to south discontinuous pegmatites and hydraulic breccias have been mapped by reconnaissance surface mapping. Further work is required to determine the geometry of these features. • Soil assay laboratory ME-MS61 results have been used to refine tungsten targets. Two high-priority vein style targets have been identified within a well-developed northwest trending corridor that strikes over 5 km and is 1.5 km wide. Ground inspection and evaluation of vein systems and elements of the ME-MS61 suite indicate a north through to northeast trend which is internal within the northwest trending corridor. • ME-MS61L data and ground observations also defined an east-north- east bismuth and gold trend associated with quartz tourmaline veins. • Work by CODES in progress is evaluating vein, alteration, mineralisation metal zonation characteristics in the Blue prospect. Sample security • The measures taken to ensure sample security. • The Company maintains a chain of custody of all samples from collection through to laboratory submission. Audits or reviews • The results of any audits or reviews of sampling techniques and data. • CODES have visited sites in Blue prospect in February 2026 and also have independently verified tungsten minerals. Samples collected by CODES are currently being analysed to define mineralisation system characteristics 13 www.rightresources.com.au Section 2 Reporting of Exploration Results Criteria JORC Code explanation Commentary Mineral tenement and land tenure status • Type, reference name/number, location and ownership including agreements or material issues with third parties such as joint ventures, partnerships, overriding royalties, native title interests, historical sites, wilderness or national park and environmental settings. • The security of the tenure held at the time of reporting along with any known impediments to obtaining a licence to operate in the area. • The tenement EL9028 is 100% owned by Right Resources Ltd in New South Wales, Australia. • The samples were collected in the Green Hills State Forest (pine) operated by NSW forestry. • Historical alluvial mining has been mined in the creeks through the Project Areas. Exploration done by other parties • Acknowledgment and appraisal of exploration by other parties. • Historic mining work occurred between 1855 and 1954 across the Tumbarumba Gold Fields. • The Company has obtained hardcopy reports and maps in relation to this information as part of its historical review in preparation for their current work program. • The historic data comprises mine production records from the NSW Mine Registrar. • There is no known modern exploration in the Blue Prospect area on EL9028. Geology • Deposit type, geological setting and style of mineralisation. • The broader mineralisation system is interpreted to be a reduced intrusion- related system. Drill hole Information • A summary of all information material to the understanding of the exploration results including a tabulation of the following information for all Material drill holes: • easting and northing of the drill hole collar • elevation or RL (Reduced Level – elevation above sea level in metres) of the drill hole collar • dip and azimuth of the hole • down hole length and interception depth • hole length. • If the exclusion of this information is justified on the basis that the information is not Material and this exclusion does not detract from the understanding of the report, the Competent Person should clearly explain why this is the case. • No drilling has occurred across the Blue Prospect on EL9028. Data aggreg