Gold & Silver Exploration Targets for New England Prospects
Released
Released
Announcement PDF
Right Resources Limited
ABN 81 649 632 744 www.rightresources.com.au
41-47 Colin Street
West Perth WA 6005
ASX Announcement
+61 8 6245 2050
ASX:RRE
20 February 2026
Gold and Silver Exploration Targets Defined
for two New England Prospects
Highlights
• Two Exploration Targets defined on EL9142 in the New England Region of New South Wales following
evaluation of historic drilling, LiDAR interpretation and geophysical datasets.
• Kingston Prospect Exploration Target defined over a mineralised strike length of 650 m, trending
015°, with average thicknesses ranging from 1-9 m and mineralisation interpreted to extend to depths of
120 m, remaining open along strike and at depth, highlighting significant gold and silver upside.
- Evaluation of 13 historic drillholes, with six holes returning significant gold intercepts from quartz–
sulphide reef mineralisation, including1,2
;
3 m @ 108g/t Au and 102 g/t Ag from 58 m (B002)
1 m @ 2 g/t Au and 122g/t Ag from 24 m (B011)
1 m @ 2 g/t Au and 136g/t Ag from 31 m (B018)
• Mary Read Prospect Exploration Target defined over a mineralised strike length of 1.5 km, trending
007°, with average thickness ranging from 1-5 m and mineralisation interpreted to extend to depths of
300 m, remaining open along strike and at depth.
- Historic near surface mining returning average grades of 567 g/t Ag, increasing to >1,900 g/t Ag for
fresh mineralisation3
.
- Evaluation of 10 historic drillholes informs Exploration Target1
, with two holes returning significant
silver intercepts from reef mineralisation, including1,2
;
4.6 m @ 75.6 g/t Ag from 52.9 m (J3D4)
0.8 m @ 262 g/t Ag from 58.5 m (J3D2)
Right Resources Limited (ASX: RRE) (Right Resources or the Company) is pleased to announce the delivery
and declaration of the Exploration Targets for the Mary Read and Kingston Prospects located within the New
England Fold Belt in New South Wales (NSW).
Right Resources Managing Director, Graham Howard, commented: “While we continue to advance our
Flagship Pilot Project, we are equally focused on unlocking value across our broader portfolio. Today’s release of
Exploration Targets across two prospects at the New England Region marks another important milestone in that
strategy.
We are pleased to have defined a compelling high-grade gold and silver Exploration Target at Kingston and
delivered strong results from Mary Read. The establishment of these Exploration Targets highlights the scale and
strength of a potentially significant gold-silver system across EL9172.
While gold remains our primary focus, the silver upside identified in these results and from historical drilling,
enhances the overall opportunity of New England and reinforces the potential scale of the asset. We look forward
to advancing these targets through the next phase of exploration and delivering further value to shareholders.”
1
Refer to appendix for drill hole details and the supporting JORC 2012 Table 1.
2
Significant intercepts are defined as intervals averaging >50 g/t Ag and where Au >1g/t, 1m of dilution (>9g/t Ag) has have been included. No top cuts have been
applied to high-grade values. Intercepts are reported as downhole lengths; true widths are not yet determined.
3
https://search.geoscience.nsw.gov.au/report/R00015585
2 www.rightresources.com.au
New England Region
Right Resources holds a substantial exploration footprint in NSW, comprising approximately 1,891 km² in the
Tumbarumba Region and 198 km² in the New England Region. While the Pilot Project at Maragle (EL9449)
remains the Company’s flagship asset, ongoing technical work continues to unlock value across the broader
tenement package.
The New England Region is located within the New England Orogen, a well-endowed province with historic gold,
silver and base metal production, and is considered prospective for high‑grade lode‑hosted and lower‑grade
stockwork porphyry related mineralisation.
LiDAR Survey and Target Generation
In 2023, the Company completed a high‑resolution LiDAR survey across the New England tenements. Using a
methodology consistent with that successfully applied at the Tumbarumba Region, geophysicist Mr Paul Mutton
(Touchstone Geophysics) applied proprietary algorithms to identify subtle topographic features interpreted to
represent unrecorded historic workings and structural controls on mineralisation. Initial interpretation focused on
the south‑western corner of EL9142, reflecting the availability of historic drilling records in this area (Figure 1).
Integration of the LiDAR interpretation with historic drilling, mining records and geological datasets across EL9142
enabled the prioritisation of structurally favourable corridors within the tenement. This integrated approach has
underpinned the development of Exploration Targets at the Mary Read and Kingston prospects, defining areas of
coherent mineralisation with demonstrated gold and silver endowment and clear potential for further growth.
Figure 1: LiDAR interpretation for EL9142 showing significant historical workings in relation to the two exploration targets
3 www.rightresources.com.au
Kingston Prospect
The Kingston Prospect is a historically mined silver–gold system within the New England Fold Belt. Mining
between 1878 and 1884 targeted near-surface quartz reefs via shallow shafts, trenching, and limited underground
workings, supporting the presence of a well-developed mineralised system that remains largely untested by
modern exploration.
Two styles of mineralisation are recognised:
• Narrow, high‑grade silver‑dominant quartz veins containing pyrite with minor galena and sphalerite,
hosting silver minerals including native silver, cerargyrite and argentite; and
• Broader disseminated silver–gold mineralisation within silicified, pyritic mudstone, associated with dense
quartz–pyrite veinlet networks, suggesting potential for mineralised halos extending beyond discrete
veins.
The Kingston Reef system has been modelled over approximately 650 m of strike and to depths of
100–120 m, dipping steeply (~77° west). Vein thickness varies from 1 m to 9 m, with grade variability typical of
structurally controlled silver systems. Multiple undrilled lines of historic workings occur in the vicinity of Kingston
and Mary Read prospects.
Historic drilling (13 RC holes, 2003–2004) demonstrates continuity of mineralisation but remains insufficient for
Mineral Resource estimation. Notable intercepts include4
,5
:
• 3 m @ 108 g/t Au and 102 g/t Ag from 58 m (B002)
• 1 m @ 2 g/t Au and 122 g/t Ag from 24 m (B011)
• 1 m @ 2 g/t Au and 136 g/t Ag from 31 m (B018)
Table 1: 2026 Kingston Prospect Exploration Target Summary
Target Range Tonnage
(Kt)
Ag Grade
(g/t)
Au Grade
(g/t)
Contained
Ag (Koz)
Contained
Au (Koz)
Kingston
Prospect
Lower limit 300 28 3.7 300 30
Upper limit 400 39 4.9 500 60
Cautionary Statement: The Exploration Target has been defined based on limited drilling. The potential
quantity and grade of the Exploration Targets are conceptual in nature and, as such, there has been
insufficient exploration drilling conducted to estimate a Mineral Resource. At this stage it is uncertain if
further exploration drilling will result in the estimation of a Mineral Resource. The Exploration Target has
been prepared in accordance with the JORC Code (2012).
Assumptions
• The Kingston Reef system has been modelled using implicit geological modelling and estimation based
on available drill data and historical mapping. The mineralised envelope extends approximately 650m
along strike, with interpreted mineralisation to 100–120 m depth, terminating around 555 mRL.
Wireframes dip 77° west and show anastomosing and flexural geometries, with interpreted thicknesses
between 1 m and 9m.
• Silver and gold mineralisation shows significant short‑range variability characteristic of nuggety or
pod‑like systems. Limited drilling reduces confidence in grade continuity and volumetric interpretation. No
direct bulk density measurements exist for the Kingston Prospect, a density of 2.65t/m³ was assigned to
fresh material based on peer analogues. No oxide material was included in the Exploration Target due to
insufficient data.
4
Refer to appendix for drill hole details and the supporting JORC 2012 Table 1.
5
Significant intercepts are defined as intervals averaging >50 g/t Ag and where Au >1g/t, 1m of dilution (>9g/t Ag) have been included. No top
cuts have been applied to high-grade values. Intercepts are reported as downhole lengths; true widths are not yet determined.
4 www.rightresources.com.au
• These assumptions are considered appropriate for a conceptual Exploration Target. The potential
quantity and grade of the Exploration Target is conceptual in nature and as such there has been
insufficient exploration drilling conducted to estimate a mineral resource. At this stage it is uncertain if
further exploration drilling will result in the estimation of a mineral resource. The Exploration Target has
been prepared in accordance with the JORC Code (2012). All figures are rounded to reflect appropriate
levels of confidence. Apparent differences may occur due to rounding.
Mary Read Prospect
The Mary Read Prospect is a historically significant silver–gold system forming part of the Boorook Silver Field,
which produced high-grade silver between 1878 and 1884. Historic mining occurred at the Calico Jack Mine,
interpreted as the northern extension of the Mary Read Reef.
Reported historic production grades averaged approximately 567 g/t Ag in near-surface oxide material, increasing
to >1,900 g/t Ag6
in fresh sulphide zones.
Ten historic drillholes completed between 1982 and 2003 provide subsurface geological control. Drilling methods
included reverse circulation (RC), percussion and limited RC drilling with diamond tails (RC/DD). This data
supports the interpretation of a coherent mineralised system; however, drill density is insufficient for reporting a
Mineral Resource under the JORC Code (2012). The limited drilling coverage also indicates significant discovery
potential along strike and at depth.
Notable historic intercepts include7,8
:
• 4.6 m at 75.6 g/t Ag from 52.9 m (J3D4)
• 0.8 m at 262 g/t Ag from 58.5 m (J3D2)
These intercepts demonstrate vertical continuity into primary sulphide zones. Mineralisation is interpreted to be
nuggety and pod-like, suggesting historic drilling may not have intersected the highest-grade shoots.
Historical reports also indicate polymetallic mineralisation, with galena carrying up to 7.4% Pb, accompanied by
sphalerite and pyrite. Gold is reported from trace levels up to 140 g/t, and zinc is locally elevated in sulphide-rich
intervals9
.
Implicit modelling has defined a mineralised envelope extending approximately 1.5 km along strike, trending 007°,
dipping steeply (~85° to the west), with widths ranging from 1m - 5m and locally up to 27m in the near-surface
oxidised zone. The system remains open at depth.
Table 2: 2026 Mary Read Prospect Exploration Target Summary
Target Range Tonnage
(Mt)
Ag Grade
(g/t)
Au Grade
(g/t)
Contained
Ag (koz)
Contained
Au (koz)
Mary Read
Prospect
Lower limit 1.8 10 0.1 600 10
Upper limit 4.5 16 0.2 2,300 30
Cautionary Statement: The Exploration Target has been defined based on limited drilling. The potential
quantity and grade of the Exploration Targets are conceptual in nature and, as such, there has been
insufficient exploration drilling conducted to estimate a Mineral Resource. At this stage it is uncertain if
further exploration drilling will result in the estimation of a Mineral Resource. The Exploration Target has
been prepared in accordance with the JORC Code (2012).
6
https://search.geoscience.nsw.gov.au/report/R00015585
7
Refer to appendix for drill hole details and the supporting JORC 2012 Table 1.
8
Significant intercepts are defined as intervals averaging >5 g/t Ag, allowing for up to 2 m of internal dilution (<5 g/t Ag). No top cuts have
been applied to high-grade values. Intercepts are reported as downhole lengths; true widths are not yet determined.
9
https://search.geoscience.nsw.gov.au/report/R00015582
5 www.rightresources.com.au
Assumptions
• The Mary Read Exploration Target has been modelled over approximately 1.5km of strike in a NNE
orientation (007°), with mineralisation interpreted between 170m and 300 m below surface, terminating
around 385mRL. The mineralised wireframes dip steeply at about 85° to the west and display variable
vein thicknesses ranging from 1m to 27 m, with dominant widths between 1 m and 5 m. An isolated
interval up to 27m wide occurs within the near-surface oxidised zone. Further drilling and detailed
geological logging are required to clarify this feature.
• No direct bulk density measurements have been collected for the Mary Read Prospect. Assigned bulk
densities of 1.8 t/m³ for oxide material and 2.65t/m³ for fresh material are based on values used for
comparable quartz‑rich geological settings by peer companies.
• The potential quantity and grade of the Mary Read Exploration Target are conceptual in nature, as
insufficient drilling has been completed to estimate a Mineral Resource and it is not yet known whether
further drilling will result in a Mineral Resource estimate. All estimates have been prepared in accordance
with the JORC Code (2012), with figures rounded to reflect appropriate confidence levels, and minor
differences may occur due to rounding.
Figure 2: Location of Exploration Targets in relation to LiDAR interpretation for south-east side of EL9142
showing significant historical workings
6 www.rightresources.com.au
Next Steps
• Continue geophysical evaluation across the northern and eastern portions of EL9142. This program
includes detailed LiDAR analysis and interpretation of magnetic survey data to delineate historic workings
and key structural trends, which will guide follow‑up ground investigations.
• Continue geophysical–lithostratigraphic interpretation to refine targeting of additional high‑grade reef and
porphyry-style mineralisation. This work is also focused on identifying priority target areas for antimony–
gold exploration.
• Ground teams will continue systematic geological mapping over key target areas to further define and
prioritise potential drill targets.
ENDS
This announcement has been approved for release by the Board of Right Resources Limited.
Further Information
Graham Howard
Managing Director
E: info@rightresources.com.au
Jessamyn Lyons
Company Secretary
E: jessamyn.lyons@rightresources.com.au
Media
Stephanie Richardson
Sodali & Co
E: stephanie.richardson@sodali.com
Follow Us
About Right Resources
Right Resources Limited is a New South Wales–based mineral exploration company focused on advancing a
portfolio of gold and copper assets across 2,089 km² of tenements in the Tumbarumba and New England regions,
both located within historically significant goldfields.
The Company’s portfolio boasts eight 100% owned exploration licences in New South Wales (NSW), which are
considered by the Company as highly prospective for copper and gold. The primary focus of exploration will be on
the six licenses held in the Tumbarumba Region, which lies within the Lachlan Fold Belt and adjacent to a prolific
mineral province near the Gilmore Fault Zone (GFZ), with over 90km of tenement strike length along this key
structural feature associated with gold mineralisation. The host geology in the project areas includes near-surface
high grade gold epithermal, porphyry, and stockwork systems.
The Company’s flagship asset is the Pilot Project, a prospective high-grade gold target in the Tumbarumba
Region. The area includes significant historic hard rock and alluvial workings that are largely undocumented in the
NSW mineral occurrence database and is completely untested by modern drilling.
7 www.rightresources.com.au
Forward Statements
This announcement may contain forward-looking statements or information, including forecasts, projections,
opinions and conclusions. These statements are not guarantees of future performance or statements of fact.
Actual events and results may differ materially due to a variety of risks, uncertainties and other factors, including,
among other things, funding requirements, metal prices, exploration and development risks, operational
challenges, competition, production risks, regulatory restrictions, including environmental regulation and liability,
potential title disputes and various business, economic, political and social uncertainties and contingencies.
Although Right Resources believes there is a reasonable basis for any forward-looking statements, such
statements involve significant risks and uncertainties.
Competent Person Statements
Emily Henry
The information in this announcement that relates to the Exploration Targets and Exploration Results is based on,
and fairly represents information and supporting documentation compiled by Ms Emily Henry, who is a Principal
Geologist at Exora Consulting Pty Ltd. Ms Henry is a Competent Person who is a Member of Australasian Institute
of Mining and Metallurgy. Ms Henry has sufficient experience that is relevant to the style of mineralisation and type
of deposit under consideration and to the activity being undertaken to qualify as a Competent Person as defined in
the 2012 Edition of the Australasian Code for Reporting of Exploration Results, Mineral Resources and Ore
Reserves (JORC Code 2012). Ms Henry consents to the inclusion in this announcement of the matters based on
her information in the form and context in which it appears.
8 www.rightresources.com.au
Appendix 1 - JORC Table 1, Sections 1 - 2
JORC Table 1 Sections 1 - 2 Mary Read Prospect
Section 1 Sampling Techniques and Data
Criteria JORC Code explanation Commentary
Sampling techniques • Nature and quality of sampling (e.g. cut
channels, random chips, or specific
specialised industry standard measurement
tools appropriate to the minerals under
investigation, such as down hole gamma
sondes, or handheld XRF instruments, etc).
These examples should not be taken as
limiting the broad meaning of sampling.
• Include reference to measures taken to
ensure sample representivity and the
appropriate calibration of any measurement
tools or systems used.
• Aspects of the determination of
mineralisation that are Material to the
Public Report.
• In cases where ‘industry standard’ work has
been done this would be relatively simple (eg.
‘reverse circulation drilling was used to obtain
1 m samples from which 3 kg was pulverised
to produce a 30 g charge for fire assay’). In
other cases, more explanation may be
required, such as where there is coarse gold
that has inherent sampling problems.
Unusual commodities or mineralisation types
(e.g. submarine nodules) may warrant
disclosure of detailed information.
• Based on historic reporting, the samples
technique of the historic drilling is:
Reverse circulation (RC) and percussion
(PERC) holes were sampled across fixed
down hole interval lengths:
• GP1 (PERC) was sampled at 2m
intervals
• All other RC and PERC holes were
sampled at 1m intervals
RC with Diamond drilling tails (RC/DD)
were sampled based on lithology and
sulphide boundaries therefore varying
interval lengths were sampled
Kratos Uranium NL (1984)
Percussion drill holes;
Percussion samples were split using a
riffle to obtain a representative sample of
approximately 500g to 1kg, these
samples were split again then pulverised
by the lab.
Diamond drill holes;
Diamond core was split or sawn and a
half core submitted. These samples
were then crushed and pulverised by the
lab prior to splitting.
All samples were analysed for Silver (Ag)
using AAS method and selected samples
were analysed for gold (Au) using AAS
method.
Samples analysed for Ag only were
prepared in a digestion of nitric and
perchloric acids and dissolved in
hydrochloric acid.
Samples analysed for both Ag and Au
were prepared by aqua regia digestion.
A selected suite of samples were also
scanned to determine base metal and
other element concentration using the
ICP technique
Mount Conqueror Minerals NL (2003)
No record of drilling and sample
preparation method
Reverse Circulation drill holes;
Samples were assayed by ALS-Chemex
using method Au-AA25 (25g Fire Assay,
AA finish) for gold and method ME-ICP41
for base metals and silver.
Higher silver values were re-run using
ASS
9 www.rightresources.com.au
Criteria JORC Code explanation Commentary
Drilling Techniques • Drill type (eg. core, reverse circulation, open
hole hammer, rotary air blast, auger, Bangka,
sonic, etc) and details (eg. core diameter,
triple or standard tube, depth of diamond
tails, face-sampling bit or other type, whether
core is oriented and if so, by what method,
etc)
• Ten historical drill holes were completed
across the Prospect area targeting the Mary
Read Reef and its northern extension, the
Calico Jack Reef.
• The ten holes include;
Getty Oil Development Company Ltd
(1982)
• 1 hole (hole ID: GP1) drilled as
percussion (PERC)
• Hole diameter for GP1 is unknown
• GP1 did not test the lode system as it
was collared to the east and drilled
parallel to the lode.
Kratos Uranium NL (1984)
• 3 holes drilled as percussion (PERC).
Percussion drilling was undertaken
using a 4.5inch (112mm) down hole
hammer
• 2 holes drilled as RC holes with
diamond core tails (RC/DD).
Diamond drilling was undertaken
using NQ equipment.
A stand pipe of 125mm diameter PVC
was left in each drill hole.
Angled diamond holes were surveyed
for declination at completions using a
Pajari survey instrument.
Percussion holes were not surveyed at
completion
Mount Conqueror Minerals NL (2003)
• 4 holes drilled as reverse circulation
(RC)
• No record of drilling set-up, diameter,
survey method
Drill sample recovery • Method of recording and assessing core and
chip sample recoveries and results assessed.
• Measures taken to maximise sample recovery
and ensure representative nature of the
samples.
• Whether a relationship exists between sample
recovery and grade and whether sample bias
may have occurred due to preferential
loss/gain of fine/coarse material.
• Method or recording and measure taken to
maximise sample recovery are not recorded.
Kratos Uranium NL (1984)
• PERC drill hole J3P2 was abandoned
at 48m after intersecting a void
between 46 and 48m (interpreted to
be the old workings between 30m
(100ft) and 43m (140ft) levels).
• Problems were experienced during
diamond drilling due to the nature of
the broken ground. The relatively soft
clayey nature of the mineralised
intervals presented difficulties when
using conventional techniques.
Historical records suggest future
diamond drilling in the area should be
undertaken using only triple tube type
equipment and the technique of ‘dry
plugging’ adopted at the first
indication of the soft ground
conditions associated with
mineralisation
10 www.rightresources.com.au
Criteria JORC Code explanation Commentary
• Historic records indicate a correlation with soft
ground and mineralisation therefore measures
should be taken to maximise sample recovery.
Logging • Whether core and chip samples have been
geologically and geotechnically logged to a
level of detail to support appropriate Mineral
Resource estimation, mining studies and
metallurgical studies.
• Whether logging is qualitative or
quantitative in nature. Core (or costean,
channel, etc) photography.
• The total length and percentage of the
relevant intersections logged.
• All down hole rock chip and drill core intervals
were geologically logged.
• No geotechnical logging has been identified in
historic reporting
• No photography is available
Sub-sampling
techniques and
sample preparation
• If core, whether cut or sawn and whether
quarter, half or all core taken.
• If non-core, whether riffled, tube
sampled, rotary split, etc and whether
sampled wet or dry.
• For all sample types, the nature, quality and
appropriateness of the sample preparation
technique.
• Quality control procedures adopted for all
sub-sampling stages to maximise
representivity of samples.
• Measures taken to ensure that the
sampling is representative of the in-situ
material collected, including for instance
results for field duplicate/second-half
sampling.
• Whether sample sizes are appropriate to the
grain size of the material being sampled.
Kratos Uranium NL (1984)
Diamond core was cut in half, with half
core submitted for analysis
Rock chip samples were riffle split to
500g to 1kg and submitted for analysis
No sampling method has been recorded for
Getty Oil Development Company Ltd (1982)
and Mount Conqueror Minerals NL (2003)
drilling
Mount Conqueror Minerals NL (2003 and
2004) sample submission to ALS Chemex in
Stafford QLD show the following sample
preparation at laboratory:
• Split sample – riffle splitter (lab
code; SPL-21)
• Pulverise sample – Split/Retain (lab
code; PUL-23)
Quality of assay data
and laboratory tests
• The nature, quality and appropriateness of
the assaying and laboratory procedures used
and whether the technique is considered
partial or total.
• For geophysical tools, spectrometers,
handheld XRF instruments, etc, the
parameters used in determining the analysis
including instrument make and model,
reading times, calibrations factors applied
and their derivation, etc.
• Nature of quality control procedures adopted
(eg. standards, blanks, duplicates, external
laboratory checks) and whether acceptable
levels of accuracy (ie. lack of bias) and
precision have been established.
• It’s assumed no QAQC has taken place on the
historical drilling.
• Assay data from laboratories do not appear to
include the use of certified reference material
or duplicate samples.
Verification of
sampling and
assaying
• The verification of significant intersections by
either independent or alternative company
personnel.
• The use of twinned holes.
• Documentation of primary data, data entry
procedures, data verification, data storage
(physical and electronic) protocols.
• Discuss any adjustment to assay data.
• No twinned holes have been drilled
• No duplicate sampling has occurred
• Collar locations of Mount Conqueror Minerals
NL (2003) drilling required updating due to
locations, when visualising holes in 3D
software, aligning above the mineralised
system. Collars were moved both east and
north (B006 – B009) based on the occurrence
of drill pads identified in the Company’s 2023
high resolution LiDAR survey, this also aligned
drilling with the trend of historic workings.
Ground truthing of these adjustments remains
outstanding.
• No adjustments have been made to the assay
data received by the laboratory
11 www.rightresources.com.au
Criteria JORC Code explanation Commentary
• The historic data has been transcribed from
historical reports
• All data has been uploaded into the Company’s
Geobank Database
Location of data
points
• Accuracy and quality of surveys used to
locate drill holes (collar and down-hole
surveys), trenches, mine workings and other
locations used in Mineral Resource
estimation.
• Specification of the grid system used.
• Quality and adequacy of topographic
control.
• The datum used is GDA 94 and coordinated
are projected as MGA zone 56.
• Surface topography has been obtained by
using high resolution LiDAR surveys at the
time of reporting flown by Right Resources
Limited in 2023. The accuracy of the locations
is sufficient for this stage of exploration.
• Collar validations identified discrepancies in
four holes where the surface expressions of
historic mine workings aligned with the
GSNSW collar co-ordinates location, therefore
generating a geological interpretation which
was displaced westward relative to the actual
position of known workings. Collar positions
for these four drill holes (B006 – B009), drilled
in 2003 by Mount Conqueror Minerals NL,
were revised to better reflect their likely true
locations. These adjustments were guided by
the position of visible drill pads and historic
workings, as interpreted from the LiDAR
imagery. Ground truthing of adjusted collars is
still required.
• All collar easting and northing coordinates
have been converted to MGA94 Zone 56.
Elevation values have been corrected by
projecting collar locations onto the high-
resolution LiDAR surface
Data spacing and
distribution
• Data spacing for reporting of Exploration
Results.
• Whether the data spacing and distribution is
sufficient to establish the degree of geological
and grade continuity appropriate for the
Mineral Resource and Ore Reserve
estimation procedure(s) and classifications
applied.
• Whether sample compositing has been
applied.
• Limited drilling has occurred across the
prospect area therefore the data spacing is
clustered and not evening distributed across
the domains.
• Historically, 2m sample composites have been
collected in GP1, however the drill hole
orientation is subparallel to the lode and
therefore no intersection of the mineralised
system occurs.
•
Orientation of data in
relation to geological
structure
• Whether the orientation of sampling achieves
unbiased sampling of possible structures and
the extent to which this is known, considering
the deposit type.
• If the relationship between the drilling
orientation and the orientation of key
mineralised structures is considered to have
introduced a sampling bias, this should be
assessed and reported if material.
• Drill holes were drilled east-west or west-east
to ensure intercepts were perpendicular to the
general strike of the lode, providing an
unbiased orientation for sampling.
• Fault orientations have been recorded as east-
west, documented as ‘cross-course’ faults and
offset mineralisation. The cross-course faults
have not been considered in the 3D model of
the mineralised wireframes due to limited data
supporting location of faults.
• Waste material has been assayed either side
of the mineralised zone.
• Mineralisation is identified close to the end of
hole depth in five of the ten holes
Sample security • The measures taken to ensure sample
security.
• It i
Share your feedback
Discover